Geodimeter 600 - Chapter 2 Pre-Measurement

1.2.1
PRE-MEASUREMENT CHAPTER 2
GEODIMETER SYSTEM 600
Office Setup
Pre-Settings
Special Settings
Test Measurements
Illustrations
Connecting the external battery to the instrument
Connecting the external battery to the control unit
Turn on power
Units
Time & Date
Display
Decimals
Switches
Standard Measure
Language
Correction for Collimation Errors
Correction for Trunnion Axis Tilt
Tracker calibration (only for servo instruments)
Instrument test
Fig. 2.1 Connecting the external battery to the instrument.
Fig. 2.2 Connecting the external battery to the control unit.
Pre-Measurement
1.2.2
1.2.2
1.2.3
1.2.3
1.2.5
1.2.6
1.2.8
1.2.12
1.2.12
1.2.16
1.2.17
1.2.19
1.2.19
1.2.20
1.2.21
1.2.24
1.2.27
1.2.29
Chapter 2