Geodimeter 600 - Chapter 5 Surveying methods

1.5.1
SURVEYING METHODS CHAPTER 5
GEODIMETER SYSTEM 600
Surveying methods
In general
Conventional Surveying with Autolock™ (only servo)
Remote Surveying
Robotic Surveying (only servo)
Eccentric Point
The RPU Menu
Illustrations
1.5.2
1.5.2
1.5.3
1.5.3
1.5.3
1.5.4
1.5.4
1.5.5
1.5.6
1.5.7
1.5.7
1.5.8
1.5.10
1.5.11
1.5.12
1.5.12
1.5.13
1.5.15
1.5.16
1.5.17
1.5.18
1.5.19
1.5.20
1.5.21
1.5.23
1.5.25
1.5.14
1.5.24
Chapter 5
Conventional surveying with servo
Autolock™ (only servo)
Remote Surveying
Robotic Surveying (only servo)
Important information when measuring with high accuracy
How to work with Autolock™
Aiming
Important information when measuring with high accuracy
How to work with remote surveying
Activation of the RPU
Aim, Measure, Register
Important information when measuring with high accuracy
How to work with robotic surveying
Search window
Activation of the RPU
Aim & Measure
Establishing contact from a detached control unit
Switch to measurement towards an ordinary prism
Switch back to robotic surveying
Search functions in robotic surveying
Fig. 5.1 Set window
Fig. 5.2 Eccentric point