2.12.3
REMOTE TARGETS CHAPTER 12
GEODIMETER SYSTEM 600
RMT602LR
RMT602LR (Part No. 571 202 480) is
an RMT602 with an increased range
of up to 700 m in Robotic mode and
1000 m in Autolock™. Other
specifications are identical to
RMT602.
RMT600TS
RMT600TS (Part No. 571 204 240) is basically a tiltable
RMT602LR equipped with a vertical angle sensor. The
RMT600TS sends its current vertical angle via the RPU radio
to the Geodimeter System 600 Pro instrument. This way the
Geodimeter instrument automatically
tilts its telescope to the correct vertical
angle. This saves a lot of searching
time, especially when working in
areas or applications where elevation
is changed frequently.
RMT600TS is powered externally via
its Hirose connector from the RPU
radio battery (it is possible to use
RMT600TS's internal batteries when
working with Autolock™). Do as
follows to set up RMT600TS (it is
assumed that you have carried out
the robotic start procedure as described
on page 1.5.12): connect the Georadio
from connector A to the control unit
Fig. 12.2 RMT602LR
Fig. 12.3 RMT600TS
Tracker
diode
Tracker
diode
To Next Page
Loading...