1.5.13
SURVEYING METHODS CHAPTER 5
GEODIMETER SYSTEM 600
4
RPU RPU
1
First press the "RPU"-button on the
instrument.
Choose 3 Remote for robotic
surveying.
Now choose method of station
establishment. In this case we
choose 1 OK=No station
establishment.
STD P0 16:12
HA: 72.0000
VA: 90.0000
RPU 16:12
1 Autolock
2 Manual
<–
3 Remote
How to work with robotic surveying
First turn on your instrument and make the necessary setup;
activate compensator, enter PPM-parameters, perform sta-
tion establishment etc. Then select radio channel in
MNU1.5. In the following examples we will use a larger
display appearance for the RPU.
Robotic
Surveying
or
Remote 16:12
1 OK
2 Known station
3 Free station
See page 1.5.15
Note-Station Establishment
Station Establishment is described in chapter 1.3.
If you don’t want to use the station coordinates according to
2 Known station, 3 Free station or 4 Known Station+ you
can choose 1 OK. In this case the horizontal angle (HAref)
that was set in the station unit will be used.
Note !
☛
Station
Establish-
ment, see
chapter 1.3
for more
informa-
tion.
3
To Next Page
Loading...