2.8.6
POWER SUPPLY CHAPTER 8 GEODIMETER SYSTEM 600
Battery Status
A battery symbol is shown in the display to indicate the
status of the battery power. A filled symbol indicates a good
remaining capacity of the battery while an empty symbol
indicates low remaining capacity. For some keyboard models
the battery status indication is numerical (5 down to 0).
However there are some remarks to be made:
• The discharge curve for NiCd and NiMH batteries may
vary a lot with the condition of the battery.
Because of this the time between a fully charged battery
and battery low will vary between a brand new battery and
an old one. It will also vary depending on what charging
method has been used and of which type the battery is.
• A battery which is taken directly from the charger may
show a full battery symbol even if it is not fully charged.
From this we recommend you to note the following:
Note !
• The battery status should be considered only as a coarse
indication of the connected battery's remaining capacity.
To Next Page
Loading...