1.1.10
INTRODUCTION CHAPTER 1
GEODIMETER SYSTEM 600
Additional control units
With System 600 you can work with two control units
attached at the same time; one at the back of the instrument
that serves as a master control unit and one at the front that
serves as a slave unit.
Having two control units attached at the same time can be
useful having in mind that they also contain internal
memories.
The control unit at the front can also be very useful when
measuring in two faces when you want to keep control of the
point to measure in face 2.
Fig. 1.4 How to attach/detach the control unit
To Next Page
Loading...