Page 124 of 127
Operating Manual
OMGEM5KN – Iss. 5.1
Copyright – Geotechnical Instruments (UK) Ltd
Clear plastic tubing used to expel gases from the
exhaust port.
Default settings preset at time of manufacture or
service.
Firmware is the term by which the internal analyser
software is known and is not accessible by the client.
This firmware is updated to the latest version when the
analyser is returned in UK for servicing.
Flow can be measured by either gas velocity m/s or
volume flow rate m
3
/hr. This measurement of flow
relates to the use of the anemometer and not the
internal flow measurement technique.
For the measurement of gas flow at the sample point.
Also referred to as GAM. PC based software which
enables the operator to upload and download
information to/from the analyser.
Gas Analyser Manager enables operators to maximise
the operation of their gas analyser. It features a simple
upload and download facility and is fully compatible
with the latest Microsoft™ operating systems.
This is optional.
The gases that are analysed by the instrument.
The positional rate of change of the gas. Measured
using the optional anemometer.
Displayed throughout the documentation with a
warning symbol. Warning information may affect the
safety of operators.
To Next Page
Loading...
Need help?
General
