5) Select ‘Key 3’ to toggle between ‘Manual Update’ and ‘Automatic Update’ in order to choose how
the date and time is set if updating from satellite signal.
Manual
Used to manually obtain and update the date and time from the satellite signal when requested.
Select soft-key ‘Set now’ to set date and time from satellite when available.
Automatic
Used to automatically update the date and time received from the satellite signal when available.
This option is only available when the GPS option is fitted to the analyser at the time of
manufacture.
6) Select the soft-key ‘Exit’ to exit and return to the ‘Device Settings’ menu.
Bluetooth
This option enables the operator to set and utilise Bluetooth technology. This may be useful
when downloading gas readings from the analyser to the PC instead of connecting the analyser to
a PC via a USB lead. Bluetooth may also be used to transfer Site IDs to other 5000 series gas
analysers if required.
1) Select the ‘Menu’ key on the front of the analyser to display the ‘Device Settings’ menu.
2) Select ‘Key 2 – Bluetooth’ and the following screen is displayed:
Bluetooth options
3) Enter the ‘Pairing PIN’ value when prompted by your computer for the device’s pairing code.
4) Select soft-key ‘Exit’ to exit the screen and return to the ‘Device Settings’ menu.
To Next Page
Loading...
