Page 47 of 127
Operating Manual
OMGEM5KN – Iss. 5.1
Copyright – Geotechnical Instruments (UK) Ltd
Routes
Using the optional Gas Analyser Manager Software (GAM) you can upload a route, this is a predefine list of IDs
that you can go through in an order. This feature is useful if you have a certain order to complete your IDS in.
Furthermore if your GA5000 has v1.12 or higher firmware it will strike through your IDs once you have used
them.
Note: If the analyser is set to “route mode” (v1.12 and above), the filter box will no longer be there, as you
cannot filter in this mode. It will be replaced by “Route” and the route name.
Adjust backlight
This option enables the operator to adjust the backlight (brightness). Having this set to a darker
setting will help preserve the battery power
1) Select ‘Key 4 – Adjust Backlight’ and the following screen is displayed:
Adjust backlight
2) Keys 4 and 6 can be used to adjust the brightness of the display screen.
‘Manual’ disables the backlight timeout.
To Next Page
Loading...
Need help?
General
