MENU KEY
The ‘Menu’ key enables the operator to select options to set up specific parameters and perform
operational tasks prior to sample readings being taken or to view data and information stored in
the instrument.
1) Select the ‘Menu’ key on the front of the analyser and the following screen is displayed:
Operation settings
2) Press the relevant numeric key on the analyser keypad to select the required option.
3) To exit this menu, select the soft-key ‘Exit’ on the front of the analyser and the operator is returned
to Main Gas Read Screen.
OPERATION SETTINGS
To access the ‘Operation settings’ menu, select the ‘Menu’ key on the front of the analyser. The following menu
is displayed:
Operation settings menu
To Next Page
Loading...
