DEVICE SETTINGS
To access the ‘Device Settings’ menu, select the ‘Menu’ key on the front of the analyser to display the ‘Operating
Settings’ menu followed by the soft-key to display ‘Device Settings’ menu. The following menu is displayed:
Device settings menu
Date and time
This option enables the operator to set the instrument date and time or to receive and update the
settings automatically from satellite signal.
1) Select the ‘Menu’ key on the front of the analyser to display the ‘Device Settings’ menu followed by
‘Key 1 – Date and Time’ and the following screen is displayed:
Date and time
2) Select ‘Key 1 – Set Date’ and key in the required date. Type the date using the numeric keypad. Press
the soft-key ‘Date Format’ to toggle and select the required date format i.e. dd/mm/yy. Press the
‘Enter’ key to confirm and update the date setting.
3) Select ‘Key 2 – Set Time’ and key in the required time (hh:mm). Type the time using the numeric
keypad and press the ‘Enter’ key to confirm the update.
4) The operator may also change the default time zone. Selecting the ‘Key 4 Scroll-left’ or ‘Key 6 –
Scroll right’ to move through the different time zones. Press the ‘Enter’ key to confirm your default
setting.
To Next Page
Loading...
