Geotech GEM5000 - Page 38


Page 38 of 127
Operating Manual
OMGEM5KN – Iss. 5.1

Copyright – Geotechnical Instruments (UK) Ltd
GEM5000
3) Select ‘Key 6 – Technician login’ and the following screen is displayed:
Technician login
4) Use the cursor keys to move throughout the list of IDs displayed; select the ‘Enter’ key to select
choice of ID, default if no IDs are listed or soft-key ‘Skip’ to skip the selection.
5) The operator will return to the ‘User settings’ menu.
Note: If no technicians are loaded via GAM this section is skipped during start up and the ‘Technician ID’ icon
is removed from the menu.