Administrator Mode
83
4 4
3
Unattended
Object
The icon
flashes when an unattended object stays
within the camera view. For details, see 4.2.3
Unattended Object.
4 Intruder
The icon
flashes when an intruder crosses the
defined regions. For details, see 4.2.2.1 Intruder.
5 People Count
The icon
flashes when the target object crosses
the defined regions. For details, see 4.2.2.2 People
Count.
6 Loitering
The icon
flashes when motion has been detected
within a certain time frame. For details, see 4.2.2.3
Loitering.
7
Tampering
Alarm
The icon
flashes when the camera is being
physically tampered. For details, see 4.2.4
Tampering Alarm.
8 Delete
Removes an unwanted detection area. After you click
, a X icon will appear on the defined area,
e.g. . Click the X icon to remove a
defined area.
9 View / Edit
Displays the current settings of a detection region.
After you click
, a pen icon will appear on
the defined area, e.g. . Click the pen
icon to display its elated setting page to the left side
of the live view.
To Next Page
Loading...
Need help?
General