EasyManuals Logo

GeoVision GV-BL1500 Firmware Manual

GeoVision GV-BL1500
257 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #152 background imageLoading...
Page #152 background image
Administrator Mode
131
4 4
Recording Profile: This setting is only applicable for recording to the
camera’s memory card. Select Performance to maximize the lifespan
of the memory card by restricting the frame rate to 30 fps and
maximum bit rate to 4 Mbit. Select Quality to adopt your current
settings. The default setting is Performance.
Record audio: Activates audio recording when an event occurs.
Recording Policy: By default, the camera will only record to the
memory card when the camera is not streaming live view to other
applications (e.g. GV-VMS) or Web browser. Alternatively, you can
set the camera to always record to the memory card as a secondary
backup.
Note: When the camera is recording to the memory card, it is
recommended to connect no more than two connections to the camera
using Web interface or other applications.
4.5.1 Monitoring Settings for GV-EBL2101 / 2111 / 3101
In the Monitoring Settings page for GV-EBL2101 / 2111 / 3101, click Start
to activate e-mail and FTP alert functions. Be sure to complete related
settings on the Motion Detection, email and FTP pages.
Figure 4-35

Table of Contents

Other manuals for GeoVision GV-BL1500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GeoVision GV-BL1500 and is the answer not in the manual?

GeoVision GV-BL1500 Specifications

General IconGeneral
BrandGeoVision
ModelGV-BL1500
CategoryIP Camera
LanguageEnglish

Related product manuals