Recording and Playback
175
5
5.2.2 Playback over Network
With the Remote ViewLog function, you can play back the files recorded at
the camera over TCP/IP network. You can also play back the files recorded
at the camera over GV-NAS System.
1. The camera needs to allow the remote access with ViewLog Server
activated. See 4.4.7 ViewLog Server.
2. For the first-time user, run the Remote ViewLog program from the
Software DVD. Next time whenever you like to use this remote
playback function, access this option from the camera’s Web interface.
3. When the Remote ViewLog player is enabled, you will be prompted to
select Remote ViewLog Service or Remote Storage System. Select
Remote ViewLog Service.
4. When this dialog box appears, type the camera’s IP address, login ID
and password. In the Host Type field, select GV-IP Device-SD Card.
and the default port is 5552. To retrieve recordings from GV-NAS
System, select GV-IP Device-NAS and the default http port is 80.
Figure 5-6
4. Click Connect to access the files of the camera for playback.
To Next Page
Loading...
Need help?
General