206
7.1.1 Customizing IP Camera Settings on GV-DVR /
NVR
After the IP camera is connected and assigned with a display position, you
can configure the camera’s settings such as frame rate, codec type and
resolution. Right-click the desired camera to see the following list of options:
Figure 7-6
Change Resolution: Changes the display ratio, live view resolution
and record resolution
Network Time Out: When network disconnection exceeds the
specified time period, the camera status will be displayed as
Connection Lost.
Change Live View Codec: Changes the live view codec.
Change Record Codec: Changes the recording codec.
Live-view frame rate control (Sub stream): Sets the live view frame
rate of the sub stream to help reduce the CPU usage. If you have set
the live view codec to be JPEG, select the number of frames to allow
in a second. If you chose the H.264 codec, select one of the following
options:
~ Maximum Live-view Frame Rate: View the video at the
maximum frame rate possible.
To Next Page
Loading...
Need help?
General