98
4.2.3 Unattended Object / Missing Object Detection
When any unattended objects or missing objects are detected within the
camera view, the event will be recorded to the connected surveillance
system GV-VMS for later retrieval.
1. From the Video Analysis drop-down list, select Unattended Object /
Missing Object Detection. This page appears.
Figure 4-20
2. Select Enable.
3. Select one of the following tasks.
Unattended Object: An object left unattended.
Missing Object: The removal of an object from the defined
region.
Both
4. Use the Sensitivity slider to set a desired sensitivity level for the
detection region you want to define in step 5. The sensitivity levels
range from 1 to 10, with 8 as default. The higher the level, the more
sensitive the camera is to motion.
To Next Page
Loading...
Need help?
General