Administrator Mode
127
4 4
4.4.9 Speaker
Note this function is only available for Advanced Cube Camera.
The Advanced Cube camera is equipped with an alarm. With the Speaker
settings, your camera can sound the speaker when the camera is being
tampered or when motions are detected. This function is disabled by
default.
Figure 4-33
1. Select Enable.
2. Type the duration time in the Alerts Interval time field. The default
value is 5 (minutes). When a motion is detected, the alarm will be on
for the specified amount of time.
3. Select Tampering Alarm and/or Motion Detection under Alarm
Settings.
To sound the alarm upon motion events, make sure you have enabled
motion detection. For details, see 4.1.2 Motion Detection.
To Next Page
Loading...
Need help?
General