102
7. To trigger the e-mal alert when tampering alarm is detected, configure
e-mail server and select Motion Detection alarm. See 4.4.1 E-Mail
8. To notify GV-Center V2, GV-Vital Sign Monitor and GV-VMS when
tampering alarm is detected, enable the connection to these systems.
See 4.4.3 Center V2, 4.4.4 Vital Sign Monitor and 7.2 Setting up IP
Cameras on GV-VMS.
In GV-VMS, when the event is detected on the camera, you will see the log
“Advanced Scene Change Detection” as illustrated below.
IMPORTANT: It is required to enable the “Video Analysis on Camera”
function on GV-VMS in advance. See Important note on page 78.
To Next Page
Loading...
Need help?
General