Administrator Mode
151
4 4
1. Select Enable SNMPv1 SNMPv2c to enable the function.
2. To enable access to Read/Write community, type a community
string. This will serve as a password to allow read and write access to
the camera from the SNMP software.
3. To enable Read only community, type a community string to allow
read-only access to the camera from the SNMP software.
4. For a more secured connection, select Enable SNMPv3 to enable
SNMP version 3.
5. To enable access to SNMPv3 Read/Write community, type a
community string.
6. Select an Authentication Type to use for SNMP requests.
7. Type the Authentication Password and Encryption Password. You
will need to type these passwords in the SNMP software to be able to
access the camera.
8. To enable access to SNMPv3 Read only community, follow steps
5 ~ 7.
9. Click Apply to save the settings.
To Next Page
Loading...
Need help?
General