Administrator Mode
161
4 4
Read Only
The storage device cannot be written due to
abnormal power disruption.
Repairing
The system is attempting to repair the recording
data.
Note:
1. If Enable Recycle is selected, the available space of the storage
device must be higher than the space you specified at the Stop
recording or recycle disk when free space of disk is smaller than
x option. Otherwise no video will be recoded.
2. The recording data may be lost if you remove the storage device
during recording.
3. If you do not remove the storage device properly, the data cannot be
read in another computer. In this case, re-plug the storage device
back to the camera. The system will repair the data automatically.
When the system is repairing the data, the Remove field will display
“Repairing”.
4. To upgrade the firmware from versions earlier than V2.07 to the latest
version, be sure to back up the recordings on the camera’s storage
device first before the upgrade, and re-format the memory card after
the upgrade. If you have not done so, this warning message appears
when you view the Monitoring or Storage Settings’ Web interface:
Figure 4-51
To Next Page
Loading...
Need help?
General