8
B. Type the Network Name (SSID) or click the Access Point
Survey button to search and select for the available Access
Points/wireless stations.
C. Select Ad-Hoc or Infrastructure for the Network type.
D. Select the Authentication Type using the drop-down list. You
can also obtain this information by clicking the Access Point
Survey button.
E. Type the WPA-PSK Pre-shared Key or WEP depending on the
encryption setting for the Access Point.
F. Click Apply to save the configuration.
Note:
1. Your encryption settings must match those used by the Access
Points or wireless stations with which you want to associate.
2. When Ad Hoc is used, only WEP encryption is supported.
3. When you lose the wireless access, you can still access the unit by
connecting it to a LAN and using the GV IP Device Utility to search
for the device.
4. For detailed information on configuring the wireless LAN, see 4.7.2
Wireless Client Mode.
To Next Page
Loading...
Need help?
General