11
Performing the Initial Startup
NOTE: You must use AC power when starting up the device for the very first time.
When turning on your device for the very first time, you will be guided
through a setup process.
1. Make sure that your device is connected to AC power.
2. To turn on the device, press and hold the power button for at least 3
seconds until the Power indicator lights up.
The device powers up and displays the initial screen.
3. Follow the on-screen instructions to complete the initial setup process.
After the setup is completed, the Home screen appears. You can now
use your device.
To Next Page
Loading...
Need help?
General
