Getac ZX10 - Navigating on the Screen

13
Navigating on the Screen
Use the stylus (or your finger) to navigate and select objects on the screen.
Here are some common terms that you should know when using the
touchscreen:
 Tap
Touch the screen once with the stylus (or finger) to open an item or
select an object.
 Tap and hold
Touch and hold the stylus (or finger) on an item to see a list of actions
available for that item.
 Drag
Hold the stylus (or finger) on an item and, without lifting the stylus (or
finger), move across the screen until you reach the target position.
 Swipe or slide
Move the stylus (or finger) across the screen, without pausing when you
first touch it (so you don’t “drag” instead). For example, you slide the
screen up or down to scroll a list.
 Pinch
In some applications (such as Maps and Photos), you can zoom in and
out by placing two fingers on the screen at once and pinching them
together (to zoom out) or spreading them apart (to zoom in).
NOTE:
 An optical film has been attached to the screen before shipment. The film is
a consumable, which will be worn out by possible scratches. You can purchase
a new one when replacement is required.
 When the touchscreen does not seem to respond, put the device to sleep
and then wake it. The screen should function again.