3. After connecting to the WiFi of the upstream router, the
upstream router changed the SSID/password, or restricted the
connection.
It can be divided into three phases, the waiting phase, the scanning phase,
and the connecting phase.
Note: There are some problems during the scanning phase and the
connection phase.
1. In the waiting phase, everything is OK.
2. In the scanning phase, data packet may loss in the scanned
band, possible connection problems for new devices. For GL-
AXT1800 and GL-AX1800, the Guest Wi-Fi will be temporarily
turned off.
3. In the connecting phase, the Main Wi-Fi on the corresponding
band may be disconnected.
To Next Page
Loading...
