9.5 Network Mode
On the left side of web Admin Panel -> MORE SETTINGS -> Network Mode
When you change the router’s network mode, you may need to re-connect
all your client devices.
When you use Access Point/Extender/WDS mode, you may not connect to
the web Admin Panel again. Try to access the web Admin Panel by the IP
address that parent router assigned to this router. Or you can Press and
hold the reset button for 4 seconds to revert to Router mode.
Here is an example of GL-AXT1800.
Note: some models do not support WDS mode.
To Next Page
Loading...
Need help?
General
