2. First time setup
The first setup of the GL.iNet router is very similar, here is the example of GL-
AXT1800(Slate AX).
Please prepare the following items that included in the package.
GL-AXT1800, power adapter, ethernet cable.
There is a video guide:
https://youtu.be/f7DYULL6ZSI
Power on
If you want to use TF card, please insert before powering on the router. Hot
plugging for TF card is not supported.
Plug one end of the power adapter into the router and the other end into an
outlet. It will automatically power on.
Connect to the router
You can connect to router via an ethernet cable or via Wi-Fi.
• Connect via cable
Connect your computer to the LAN port of the router
via Ethernet cable.
• Connect via Wi-Fi
The SSID was printed on the bottom label of the router
with the following formats:
GL-AXT1800-XXX or GL-AXT1800-XXX-5G
Search for the SSID of the router in your
computer/phone/tablet and input the WiFi password.
Please find the WiFi password on the label on the back
of the router. Some models if you can't find the WiFi
password on the label, please try the default
password goodlife.
Tip: The QR code on the label on the back of the GL-
AXT1800 is with wifi connection information and can
be quickly connected using your phone's QR code
scanning tool.
To Next Page
Loading...
Need help?
General
