1-5
INTRODUCTION
1.3 AUTO BUMP / CALIBRATION HARDWARE
(1/4 in. ttings)
• The Auto Bump / Calibration Station (GMI Part No.
64052Q) includes Adaptor Kit, 12V output Universal
Power Supply Unit (PSU), and USB Memory Stick with
GMI ‘PS200 Settings’ software pre-installed.
• A Test Gas Kit (GMI Part No. 64060) is available as an
accessory and is supplied complete with Combi Test Gas
Cylinder (containing a mixture of 2.5% CH
4
, 500ppm CO,
50ppm H
2
S, 18% O
2
and balance N
2
), On Demand Gas
Flow Regulator and Tubing.
1.4 ADDITIONAL ACCESSORIES
• Combi Test Gas Cylinder (GMI Part No. 99146) containing
a mixture of 2.5% CH
4
, 500ppm CO, 50ppm H
2
S, 18%
O
2
and balance N
2
. This cylinder is supplied in Test Gas
Kit(s) above.
• On Demand Gas Flow Regulator (GMI Part No. 99118).
This regulator is supplied in Test Gas Kit(s) above.
• 1.0 metre Tygon
®
tubing complete with 6mm adaptor
(GMI Part No. 64265).
• Adaptor Kit (GMI Part No. 67305) 6mm to
1
/4in. adaptor
x 3.
To Next Page
Loading...
