GMI PS200 series - ATTACH STATION to WORKBENCH; DAISY CHAIN OPTION

A-3
APPENDIX-A
5. Loosely attach two double sems pozi pan screws (Part
No. 24957) through bracket and into rear panel of Bump
/ Cal Station, as illustrated in Fig. A-2.
6. Using a No.2 Pozidrive screwdriver, tighten all four screws
to secure.
1.3 ATTACH STATION to WORKBENCH / DAISY CHAIN
OPTION
The bracket can be secured to a workbench or similar type
surface using four suitable screws (not supplied).
Fig. A-3 Attach Bump / Cal Station to Workbench