GMI PS200 series Handbook

A-1
A
FIT MOUNTING BRACKET
Fig. A-1 Auto Bump / Calibration Station
(with mounting bracket tted)
1.1 GENERAL DESCRIPTION
The GMI Personal Surveyor 200 (PS200) Series Auto Bump
/ Calibration Station is supplied with a mounting bracket and
necessary screws to secure the station to a workbench or
similar.
The bracket also provides the facility to ‘daisy chain’ a series
of Bump / Cal Stations if required.

GMI PS200 series Specifications

General

Display	LCD
Alarm Type	Audible, visual, and vibration alarms
Resolution	Depends on the gas being detected
Accuracy	Varies depending on the gas and sensor. Consult the specific sensor datasheet.
Operating Temperature	-20°C to +50°C
Power Supply	Rechargeable Li-ion battery
Pump Type	Built-in sample pump