GMI PS200 series - View; Print Test Results; Introduction

5-1
VIEW / PRINT TEST RESULTS
5.1 INTRODUCTION
The test results of all instruments that have been Bump
Tested / Calibrated in the Station are stored in the Station
internal memory.
These results must be downloaded to a PC / Laptop for
viewing or printing.
The Memory Stick (Part No. 64184), containing ‘GMI Settings’
software and supplied with the Auto Bump / Cal Station, must
be used to download this data.
Fig. 5-1 Downloading Memory Stick
The memory stick can be used to download data from several
GMI Auto Bump / Cal Stations, if required.
The data identies the serial number of the Station used
to download data from each instrument bump tested or
calibrated.
5