GMI PS200 series - Include Company Logo

5-13
VIEW / PRINT TEST RESULTS
Fig. 5-15 Certicate Completed
When ‘Certicate Printer’ window is complete, select the
‘Create Certicate’ button, illustrated in Fig. 5-15, to print
certicate as illustrated in example Fig. 5-18.
Include Company Logo:
To include your company’s logo on printed certicate, insert
the logo le, named logo.jpg into the ‘Generated Certicates’
folder on the Memory Stick (Part No. 64184). The logo will
be included in the top right hand corner of the certicate , as
illustrated in ‘GMI’ logo example in ‘Bump Results’ certicate,
illustrated in Fig. 5-17.
Note: The logo (.jpg) le dimensions must not exceed
200 (W) x 50 (H) pixels.