2-1
2
CONNECT CALIBRATION GAS & POWER SUPPLY
2.1 CONNECT CALIBRATION GAS
Gas is supplied to the Auto Bump / Calibration Station from
the Combi Test Gas Cylinder (GMI Part No. 99146) via an On
Demand Flow Regulator (GMI Part No. 99118) and Tygon
®
tubing complete with adaptor (GMI Part No. 64265).
Fig. 2-1 Calibration Gas Setup
The above three items are available as a Test Gas Kit
(GMI Part No. 64060).
To Next Page
Loading...
