3-5
VIEW / RE-CONFIGURE SOFTWARE
3.1.1 Quick Bump Test
A quick bump test provides the user with the option of verifying
that the instrument alarms will activate when the alarm
setpoints are reached. The default quick bump test time for
applying gas is set at 15 seconds when using the GMI Test
Gas Cylinder (Part No. 99146).
To select this option, position the cursor on the adjacent radio
button then left click mouse button to conrm, as illustrated
in Fig. 3-6.
Fig. 3-6 Quick Bump Test Option
If, for any reason, the instrument alarm levels are edited,
there may be a requirement to use a different gas cylinder
and extend the gas delivery duration. If this is the case, a drop
down list of test times (in seconds) is available.
Fig. 3-7 Test Time
To Next Page
Loading...
