2-5
CONNECT CALIBRATION GAS AND POWER SUPPLY
For
1
/4 in. o/d tubing (not supplied), an adaptor kit
(6mm to
1
/4 in.) is available as an accessory and
supplied as a pack of 3 (Part No. 64085). The adaptor
is tted, as illustrated in Fig. 2-6, before connecting
tubing.
Fig. 2-5 Connect Gas Tubing Adaptor to Station
Fig. 2-6 Fit 6mm to
1
/4 in. Adaptors (if required)
To Next Page
Loading...
