4-2
AUTO BUMP / CAL STATION - HANDBOOK
After a further 25 seconds three green LED’s extinguish
leaving only the ‘ON’ indication illuminated, as illustrated in
Fig. 4-1. Next, three LED’s coloured orange, orange and red
illuminate briey in sequence, indicating that GMI ‘TEST’
software has started.
Finally, the ‘ON’ indication is illuminated as illustrated in Fig.
4-1 and the Auto Bump / Cal Station is now ready for operation.
To release the front cover of the Auto Bump / Cal Station,
press the cover latch downwards, as illustrated in Fig. 4-3,
then open the cover fully.
Note that the front cover is designed to remain in the open
position as long as necessary.
Fig. 4-3 Open Front Cover
To Next Page
Loading...
