5-3
VIEW / PRINT TEST RESULTS
When the USB memory stick is inserted in Auto Bump / Cal
Station, all stored test results are automatically transferred
to the memory stick. During this process three green LED’s
ash in sequence from left to right, as illustrated in Fig. 5-4.
Fig. 5-4 Downloading Data
This is followed by all four green LED’s illuminating, as
illustrated in Fig. 5-5, indicating that download is complete.
Fig. 5-5 Download Complete
Next, LED’s coloured orange, orange and red illuminate, as
illustrated in Fig. 5-6. This indicates that the test data has
been downloaded and GMI ‘TEST’ software has re-started.
Fig. 5-6 Test Software Re-started
Next, the three (orange, orange and red) LED’s extinguish,
leaving only the ‘ON’ LED illuminated, as illustrated in
Fig. 5-7.
To Next Page
Loading...
