KB300 / KB350 with FS560
Translation of the original operating instruction and spare parts list
- 12-
5006892-01
BA-E
®
The exhaust of the motor as well as the exhaust gas hose were fitted with a protection against accidental
contact in order to avoid direct skin contact with hot surfaces.
The operating handle of the motor can be kept in the hand but also be positioned via the grip-adaption to the
unit.
On the gear box, either a drill bit flange or an adapter for the different tool sizes can be fitted. The
assembly of the tool is simple and easy. Regarding the flange the drill bit is fixed via a screw connection,
regarding the adapter via a threaded bolt.
The safe and easy assembly allows a quick exchange of the tools.
Water is supplied either via the supplied pressurized water container or via an external water connection. The
water hose of the pressurized water container is fitted via a coupling on the connection of the drill carriage. Thus
the water is directly routed via the gearbox into the drill bit and provides a sufficient cooling of the tool and binds
the cutting material.
The drill carriage moves on a double-guide column by means of a trapezoidal spindle. The trapezoidal spindle
allows an easy and smooth movement of the drill carriage on the column.
The drive is provided manually by default via the hand crank which can be fixed to the unit in two different ways.
Due to its special form, the pipe base can be set up with sewer junctions having different pipe diameters but
also at ground level. The base frame is fitted on the left by default, but can also be fitted on the right side. The
base frame provides the optimal support for working with the unit sidewise.
The KB300/350 offers the possibility of angle adjustment. Via the guide column, drill cuttings can be adjusted at
angles of 90°, 55° and 45°. This requires only a few screws to be loosened and the base frame to be rotated.
Due to its variable tension belt fastening or by using pegs, the unit can be used in different operative positions.
The wide range of accessories allows opening up additional working areas and additional drive systems.
Due to its compact design, the unit is easy to transport. The motor with gearbox can be easily and quickly
removed for transport. Via the crane eye which is attached to the base frame the KB300/350 with FS560 can
also be lifted with a crane.
The operator's station is behind the guide column or on the left or right next to it.
For working with this unit we recommend GÖLZ
®
diamond tools.
To Next Page
Loading...