GÖLZ KB 300 - 3 Basic Safety Instructions; Intended Use; Operating Range

KB300 / KB350 with FS560
Translation of the original operating instruction and spare parts list
- 13-
5006892-01
BA-E
®
Note / Important: Contains important information which stands out from the other text!
3. Basic safety instructions
In this manual the following terms and symbols are used for particular important information:
Important text passages are highlighted in italics or bold or can be found in a grey highlighted text field.
3.1 Intended use
The machine has been built in accordance with state-of-the-art standards and the recognized safety rules.
Nevertheless, its use may constitute a risk to life and limb of the user or of third parties, or cause damage to the
machine and to other material property.
The machine must only be used in technical perfect condition in accordance with its designated use and the
instructions set out in the operating manual, and only by safety-conscious persons who are fully aware of the
risks involved in operating the machine. Any functional disorders, especially those affecting the safety of the
machine, should therefore be rectified immediately!
The machine is designed exclusively for drilling in concrete, reinforced concrete, natural stone, cast stone and
brickwork. Using the machine for purposes other than mentioned above (such as drilling in wood and so on) is
considered contrary to its designated use. The GÖLZ
®
GmbH cannot be held liable for any damage resulting
from such use. The risk of such misuse lies entirely with the user.
Only use gear drives and motors, which are provided by GÖLZ
®
GmbH. Also attend those operating manuals.
Operating the machine within the limits of its designated use also involves observing the instructions set out in
the operating manual and complying with the inspection and maintenance directives.
3.2 Operating range
The operating range of the unit can be extended due its wide range of accessories allowing easy retrofitting
which can be carried out by the operating personnel themselves.
Do not modify, add components to or retrofit the unit in a way which could affect its safety and do not use non-
official accessories! This is not allowed without prior approval of GÖLZ
®
GmbH!
Attention: Contains instructions which must be strictly observed to prevent damage from
the unit and the operator!
Attention: Read and observe all the operating instructions which belong to this unit!
Note: Read and observe the operating instructions to the accessories!