Google Pixel 6 Pro - Page 123

Google 2021 | Confidential and Proprietary | Do not distribute 123
Logic board
01. Re-using a logic board
02. Remove protective film
●
Clean any thermal pad residual from the Logic board with an
ESD stick.
●
If there is any residue remaining, use a dust free cloth with
IPA to gently clean the surface.
Part: G949-00190-01 (Logic board)
●
Peel off the Mic1 yellow mylar from the Logic board.
●
Remove the Mic3 protective film from the Logic board.
Part: G806-03591-01 (Mic protective liner)
Do not reuse the part
Bottom spe
aker
MicLogic bo
ard
BatteryFront ca
mera
Top
Speaker
Rear ca
mera
Upper mid-f
rame
mmWaveMid-frameGraphic sh
eet
Display