Google Pixel 6 Pro - Page 124

Google 2021 | Confidential and Proprietary | Do not distribute 124
Logic board
03. P-sensor grommet attach
04. Lift the connectors
●
Apply a P-sensor grommet on the Logic board.
Part: G806-04783-13 (P-sensor grommet)
●
Lift the two connectors in the Enclosure with an ESD stick to
avoid trapping them under the Logic board.
This step is only for new logic boards or rework the P-sensor
grommet.
OK
NG: cover
the sensor
area
Bottom spe
aker
MicLogic bo
ard
BatteryFront ca
mera
Top
Speaker
Rear ca
mera
Upper mid-f
rame
mmWaveMid-frameGraphic sh
eet
Display