Google Pixel 6 Pro - Page 79

Google 2021 | Confidential and Proprietary | Do not distribute 79
mmWave
03. Assemble Sub-6 Foam
04. Assemble bracket
●
Insert Foam Sub-6 into the Enclosure.
●
Place the Foam Sub-6 matte side to yourself, not the glossy
side. And the recess as the figure shown.
Part: G806-05702-01 (Foam Sub-6)
●
Insert the bracket at an angle.
●
Place R4 Screw cover on the R4 Enclosure Holder.
●
Fasten the mmWave bracket screw with a Torx Plus (3IP),
take out the R4 Screw Cover.
Torque force ： 1.6 ± 0.03kgf-cm
Part: G730-05758-01 (bracket mmWave), G730-05758-03 (bracket sub-6)
Part: G250-05753-00 (screw)
This step is only for Sub-6 Sku.
matte side
(not glossy side)
glossy side
Bottom spe
aker
MicLogic bo
ard
BatteryFront ca
mera
Top
Speaker
Rear ca
mera
Upper mid-f
rame
mmWaveMid-frameGraphic sh
eet
Display