Google Pixel 6 Pro - Page 80

Google 2021 | Confidential and Proprietary | Do not distribute 80
mmWave
05. Peel off liner
06. Connect to Logic board
●
Peel off the mmWave flex adhesive liner, align flex
according to the outline to Upper mid-frame (as show in the
left image), and press down with an ESD Stick.
●
Connect mmWave flex and battery to the Logic board.
Check every connector is attached fully to the Logic board.
The mmWave flex is only for mmWave Sku.
This step is only for mmWave Sku.
Bottom spe
aker
MicLogic bo
ard
BatteryFront ca
mera
Top
Speaker
Rear ca
mera
Upper mid-f
rame
mmWaveMid-frameGraphic sh
eet
Display