DESCRIPTION
Here is a description of the elds in this panel:
Trap address #1...#5 ►
Address(es) of the computer(s) to which will be sent the SNMP alarm notication.
When you don’t use an address, you must check the related No box;
SYSLOG address #1...#2 ►
Address(es) of the computer to which will be sent the SYSLOG alarm notication.
When you don’t use an address, you must check the related No box;
SYSLOG File Id ►
Identify the le to use on remote computer for SYSLOG protocol;
Community name ►
A simple keyword that is needed in a SNMP browser to access SNMP information.
This keyword must have 8 letter at the most;
System name ►
A text that you can use to give a name to the LEDI Network IN. This name appears
in the sysName variable of the system branch of the MIB. The initial value is Ledi-
NetwkINnnnnnn (where nnnnnn is the serial number of the product);
System location ►
A text that you can use to indicate the physical localization of the LEDI Network IN.
This name appears in the sysLocation variable of the system branch in the MIB.
There is no initial value.
System contact ►
A text that you can use to indicate the person to contact for any problem related to
this LEDI Network IN. This name appears in the sysContact variable of the system
branch in the MIB. There is no initial value.
dentie le chier à utiliser sur l’ordinateur distant pour le protocole SYSLOG.
4. WEB INTERFACE
To Next Page
Loading...