Graco Pro Xp H60T10 - Fluid Filter Replacement

Repair
Fluid Fluid
Fluid
Tube Tube
Tube
Removal Removal
Removal
and and
and
Replacement Replacement
Replacement
1.SeePreparetheGunforService,page39.
2.Disconnectthebottom󰘱uidtubenut(C).
3.Carefullyunscrewthetop󰘱uidtubenut(D).
NOTICE NOTICE
NOTICE
Becarefulnottodamagethe󰘱uidtube
assembly(19)whencleaningorinstalling
it,especiallythesealingsurface(E).Ifthe
sealingsurfaceisdamaged,theentire󰘱uid
tubeassemblymustbereplaced.
4.Applydielectricgrease(57)totheentirelengthof
theplasticextensiononthe󰘱uidtube.
5.Applylowstrengthsealanttothe󰘱uidtubenut
threads.
6.Installthe󰘱uidtubeintothegunbarreland
tightenthetopnut(D)untilsnug,then1/2turn
tighter.Therewillbeagapbetweenthenutand
barrel.Donotover-tightenthenut.
7.Makesurethe󰘱uid󰘰lter(10)isinplaceinthe
󰘱uid󰘰tting.Tightenthebottomnut(C)securely
ontothe󰘰tting.Makesurethetopnutremains
tight.
Figure25FluidTube
Fluid Fluid
Fluid
Filter Filter
Filter
Replacement Replacement
Replacement
1.SeePreparetheGunforService,page39.
2.Disconnectthebottom󰘱uidtubenut(C).
3.Removethe󰘱uid󰘰lter(10)fromthe󰘱uid󰘰tting.
Cleanorreplacethe󰘰lter,asneeded.
4.Installthe󰘱uid󰘰lter(10)inthe󰘱uid󰘰tting.Tighten
thebottomnut(C)ontothe󰘰ttingandtorqueto
140–150in-lb(15.8–16.9N•m).Makesurethe
topnutremainstightat20–30in-lb(2.3–3.4N•m).
NOTICE NOTICE
NOTICE
Besurethe󰘱uidtube(19)isnottwistedafter
tighteningthebottomnut(C).
Figure26ReplaceFluidFilter
42
3A2495K