EasyManua.ls Logo

Gradient syncFURNACE mOD-200 - Handling Instructions for Refractory Cement Fibers (RFC)

Gradient syncFURNACE mOD-200
81 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
syncFURNACE OD Instruction & Installation Manual Rev 09 Pg. 69 of 81
APPENDIX D: HANDLING INSTRUCTIONS FOR REFRACTORY CEMENT FIBERS (RFC) >
Reduce the Risk of Exposure
Precautions and Recommended Personal Protective Equipment
Avoid contact with skin and eyes
Wear long-sleeved clothing, gloves and safety goggles or glasses.
Avoid breathing in silica dust
Wear a respirator with a N95-rated filter efficiency or better.
Use water to reduce airborne dust levels when cleaning combustion
chamber.
DO NOT dry sweep silica dust. Pre-wet or use a vacuum with a high
efficiency filter.
Avoid transferring contamination
When installing or removing RFC’s, place the material in a sealable plastic
bag.
Remove contaminated clothing after use. Store in sealable container until
cleaned.
Wash contaminated clothing separately from other laundry.
First Aid Measures
If irritation persists after implementing first aid measures consult a
physician
SKIN Wash with soap and water.
EYES DO NOT rub eyes; flush with water immediately.
INHALATION Breathe in fresh air, drink water, sneeze or cough to
clear irritated passage ways.
Note: Consult your local regulatory authority regarding current requirements for respirators, personal
protective equipment, handling, and disposal of RFC’s.

Table of Contents

Related product manuals