Using Page Button
Long press on page button on the back panel of DP760 for 7 seconds, it will remove the association values
of the previous base station.
Using Repeater Management Mode on DP750
To disconnect your DP760 DECT Repeater using the repeater management mode on DP750:
1. Access the Web GUI of your DP750 using the admin’s username and password. (Default username
and password are admin/admin).
2. Navigate to Status DECT Repeater Status.
3. Select the repeater station from Discovered Devices.
4. Clink Unlink button to dissociate the repeater from the base station.
Figure 42: DECT Repeater Status on DP750