Multiple Lines and Hunting Groups
The DP750 Base Station has the ability to assign 10 lines to each registered DP720 handset (Up to 5
Handsets) to receive/make calls.
When a handset has many lines configured, users can select specific line for outgoing calls using Outgoing
Default Line feature.
For incoming calls, users can choose either to redirect them to a specific handset or to many using Hunting
Group feature so to have the same phone number and incoming calls will be distributed in a Linear, Circular
or Parallel manner among the handsets active in that Hunting Group. The number of hunting groups is limited
by the number of SIP accounts registered to the base station (up to 10 accounts).
Hunting group feature is mainly used in office, warehouse and call center environments to distribute
incoming calls in the best way depending on the type of hunt group.
In order to configure hunting groups for DP720 Handsets registered to the Base, users need first to register
SIP accounts on DP750 Base Station SIP Account Settings and then assign accounts accordingly as lines
for DP720 Handsets Handset Line Settings.
Handset Line Settings
This section will describe how to assign lines for each DP720 Handset for making calls.
1. Access the Web GUI of your DP750 using the admin’s username and password. (Default username
and password is: admin/admin).
2. Press Login to access your settings.
3. Go to DECT Handset Line Settings, and assign to Handsets the SIP accounts already
configured. Each handset can be configured to use up to 10 sip accounts.
Figure 24: Handset Line Settings
After applying your configuration, Account Status page will display the status of handsets along with
accounts status. Each column shows one HS; each row shows if the account is assigned to a HS.
To Next Page
Loading...
Need help?
General
