Grandstream Networks DP720 Administration Guide

P a g e | 59
DP750/DP720 Administration Guide
Version 1.0.11.4
Disable Call
Waiting Tone
Disables playing call waiting tone during active call when receiving a second
incoming call. The CWCID will still be displayed. Default is No.
Custom Ringtone
Assigns custom ringtone to specific handset from the ringtones available on the
base station. It takes up to 10 ringtone files which have be named as ring1.bin to
ring10.bin, and you can assign one ringtone to each handset. Default is Disabled.
Time Format
Set the displayed Time Format on handsets to 12 hours or 24 hours. Default is 12hr.
Date Format
Set the displayed Date Format on handsets.
Settings Page Definitions
Table 12: Settings Page Definitions
Network Settings – Basic Settings
IP Address Mode
Selects IP address mode (DHCP, Static IP or PPPoE) for DP750 Base Station.
Preferred DNS
Server
Specifies preferred DNS server to use when DHCP, PPPoE or Static mode is set.
DHCP Settings
Host name
(Option 12)
Specifies the name of the client. The name may or may not be
qualified with the local domain name. This field is optional but
may be required by ISP.
Vendor Class ID
(Option 60)
Exchanges vendor class ID by clients and servers to convey
particular configuration or other identification information about a
client. Default is DP7XX.
PPPoE Settings
Configures PPPoE account ID, password and service name.
Static IP Settings
Sets IP address, subnet mask, gateway, DNS server 1, and DNS server 2.
Network Settings – Advanced Settings
802.1X Mode
Enables/Disables 802.1X mode. To enable this mode, you should select EAP-MD5.
Default is Disable.
802.1X Identity
Configures the identity for 802.1X mode.
MD5 Password
Determines the MD5 password for 802.1X mode.
802.1X CA
Certificate
Uploads / deletes the 802.1X CA certificates.
802.1X Client
Certificate
Uploads / Deletes the 802.1X Client Certificates.

Grandstream Networks DP720 Specifications

General

Brand	Grandstream Networks
Model	DP720
Category	IP Phone
Language	English