Setting up the Charge Station
Please refer to the following steps for setting up the charge station and charging the handset:
1. Connect the DC plug on the power adapter to the micro-USB connector on the charge station.
2. Connect the other end of the power adapter into an electrical power outlet.
3. After setting up the handset and the charge station, place the handset in the charge station.
Figure 6: Setting up the charge station
DP750 LED Patterns
The DP750 has 5 LED lights on it. Please refer to the following table for the meaning of each light.
Table 6: DP750 LED Patterns
The Radio icon for pairing the DP720 and DP750; when holding the Radio button,
blinking indicates a pairing attempt.